Fence Fittings

All rails & stays are connected to posts using galvanised bolted split clamp-on type fittings as shown on this page. Unless otherwise specified, all fitting sizes relate to nominal bore pipe dimensions (NB).

Gate Fittings – Hinges

Gates are connected to posts or other suitable solid structure using galvanised bolted split clamp-on or gudgeon type hinge fittings as shown on this page. Unless otherwise specified, all fitting sizes relate to nominal bore pipe dimensions (NB).

Gate Fittings – Locks

Gates are retained in the closed position by either chain or shootbolt depending on type and retained in the open position by dropbolts as shown on this page. Unless otherwise specified, all fitting sizes relate to nominal bore pipe dimensions (NB).

example

The range of fence and gate fittings below are stocked by Otter Fencing and cover the necessary range for Chain-Link fencing and gates.

Otter Fencing-Fittings-1 Universal Fitting System Otter Fencing-Fittings-2 Fixed Tee Otter Fencing-Fittings-3 Fixed Corner Otter Fencing-Fittings-4 Fixed Cross Otter Fencing-Fittings-5 Flanges

Otter Fencing-Fittings-10 FlangesOtter Fencing-Fittings-6 Post Caps

Otter Fencing-Fittings-13 Square Post Caps Otter-Fencing-Fittings-7-Hinges Otter Fencing-Fittings-8 Temporary Fence Clamps

Otter Fencing-Fittings-9 Fence Panel 'U' clip

Otter Fencing-Fittings-12 Gudgeons Otter Fencing-Fittings-11 Gudgeons

Otter Fencing-Fittings-Latches & Bolts

Click Here for a quotation or if you find the Fence or Gate Fitting is not listed above, please call our trained Fencing consultants on (03) 8791 2000.

 

All dimensions in millimetres unless otherwise stated. Specifications are subject to change without notice.